WM (POWERLine) 直線模組
THOMSON的WM P (POWERLine)定位滑塊使用絲杠支撐技術。此外，它還采用了塑料覆蓋帶系統，使產品在臟亂環境中使用時內部系統部件能夠得到妥善的保護。在這一系列產品中，WM40因其超小的尺寸，尤其適合于小型應用。
Let Thomson Help You Make Your Selection!
- Linear MOTIONEERING® LMS Sizing & Selection Tool >
- Introduction to Wheel-Guided Linear Units (Recorded Webinar) >
產品規格：
| 規格/軸的尺寸 | WM40S | WM40D | WM60D | WM60S | ?WM60X | WM80D | WM80S | WM120D |
|---|---|---|---|---|---|---|---|---|
| 截面尺寸（寬x高）: mm (in) |
40 x 40 (1.6 x 1.6) | 40 x 40 (1.6 x 1.6) | 60 x 60 (2.4 x 2.4) | 60 x 60 (2.4 x 2.4) | 60 x 60 (2.4 x 2.4) | 80 x 80 (3.2 x 3.2) | 80 x 80 (3.2 x 3.2) | 120 x 120 (4.7 x 4.7) |
| 絲杠類型 | ?滾珠絲杠， 單螺母 |
?滾珠絲杠， 雙螺母 |
?滾珠絲杠， 雙螺母 |
?滾珠絲杠， 單螺母 |
?滾珠絲杠， 雙螺母 |
?滾珠絲杠， 雙螺母 |
?滾珠絲杠， 單螺母 |
?滾珠絲杠， 雙螺母 |
| 最大行程長度: mm (in) |
2000 (78.7) | 1950 (76.8) | 絲杠導程為5、 20 mm: 11000 (433) 絲杠導程為 50 mm: 5000 (197) |
5000 (197) | 10340 (407) | 絲杠導程為5、 10、?20 mm: 11000 (433) 絲杠導程為 50 mm: 5000 (197) |
5000 (197) | 絲杠導程為5、 10、?20 mm: 11000 (433) 絲杠導程為 50 mm: 5000 (197) |
| 最大直線速度: m/s (in/s) |
0.25 (9.8) | 0.25 (9.8) | 2.5 (98.4) | 2.5 (98.4) | 0.25 (9.8) | 2.5 (98.4) | 2.5 (98.4) | 2 (78.7) |
| 最大加速度: m/s2 (in/s2) |
20 (787) | 20 (787) | 20 (787) | 10 (394) | 20 (787) | 20 (787) | 20 (787) | 20 (787) |
| 重復精度: ± mm (in) | 0.02 (0.0008) | 0.01 (0.0004) | 0.01 (0.0004) | 0.02 (0.0008) | 0.01 (0.0004) | 0.01 (0.0004) | 0.02 (0.0008) | 0.01 (0.0004) |
| 最大輸入速度: RPM (轉/s) |
3000 (50) | 3000 (50) | 3000 (50) | 3000 (50) | 3000 (50) | 3000 (50) | 3000 (50) | 3000 (50) |
| 工作溫度: °C (°F) | 0 to 80 (32 to 176) | 0 to 80 (32 to 176) | 0 to 80 (32 to 176) | 0 to 80 (32 to 176) | 0 to 80 (32 to 176) | 0 to 80 (32 to 176) | 0 to 80 (32 to 176) | 0 to 80 (32 to 176) |
| 最大動態負載 (Fx): N (lbf) |
1000 (225) | 1000 (225) | 4000 (899) | 2800 (630) | 4000 (899) | 5000 (1124) | 3500 (787) | 絲杠導程為5、 10、 20 mm: 12000 (2698) 絲杠導程為 40 mm: 8000 (1799) |
| 最大動態負載 (Fy): N (lbf) |
450 (101) | 450 (101) | 2000 (450) | 1400 (315) | 2000 (450) | 3000 (674) | 2100 (472) | 6000 (1349) |
| 最大動態負載 (Fz): N (lbf) |
600 (135) | 600 (135) | 2000 (450) | 1400 (315) | 2000 (450) | 3000 (674) | 2100 (472) | 6000 (1349) |
| 最大動態力矩 (Mx): Nm (lbf-in) |
10 (89) | 10 (89) | 100 (885) | 50 (443) | 100 (885) | 350 (3098) | 150 (1328) | 500 (4425) |
| 最大動態力矩 (My): Nm (lbf-in) |
30 (266) | 30 (266) | 200 (1770) | 100 (885) | 200 (1770) | 300 (2655) | 180 (1593) | 600 (5311) |
| 最大動態力矩 (Mz): Nm (lbf-in) |
30 (266) | 30 (266) | 200 (1770) | 100 (885) | 200 (1770) | 300 (2655) | 180 (1593) | 600 (5311) |
| 最大驅動軸力 (Frd): N (lbf) |
100 (22.5) | 100 (22.5) | 500 (112.4) | 500 (112.4) | 500 (112.4) | 700 (157.4) | 700 (157.4) | 1000 (224.8) |
| 最大驅動軸力矩 (Mta): Nm (lbf-in) |
3 (27) | 3 (27) | 35 (310) | 35 (310) | 35 (310) | 55 (487) | 55 (487) | 80 (708) |
| 絲杠直徑: mm (in) | 12 (0.5) | 12 (0.5) | 20 (0.8) | 20 (0.8) | 20 (0.8) | 25 (1.0) | 25 (1.0) | 32 (1.3) |
| 絲杠導程: mm (in) | 5 (0.2) | 5 (0.2) | 5, 20, 50 (0.2, 0.8, 2.0) | 5, 20, 50 (0.2, 0.8, 2.0) | 5 (0.2) | 5, 10, 20, 50 (0.2, 0.4, 0.8, 2.0) | 5, 10, 20, 50 (0.2, 0.4, 0.8, 2.0) | 5, 10, 20, 40 (0.2, 0.4, 0.8, 1.6) |
| 重量: kg (lb) 零行程單元重量每 100 mm 行程重量每 個滑架重量 |
1.50 (3.3) 0.30 (0.66) 0.36 (0.80) |
1.90 (4.2) 0.30 (0.66) 0.60 (1.3) |
6.16 (13.6) 0.65 (1.4) 1.99 (4.4) |
3.80 (8.4) 0.65 (1.4) 1.00 (2.2) |
10.33 (22.8) 0.65 (1.4) 1.99 (4.4) |
11.57 (25.5) 1.08 (2.4) 4.26 (9.4) |
7.0 (15.4) 1.1 (2.4) 1.6 (3.5) |
25.91 (57.1) 1.93 (4.3) 9.25 (20.4) |
?
WM直線模組特性
- 可以沿任意方向安裝
- 導向系統
- 自動調節的塑料防塵帶
- 絲杠支撐系統
WM選件
- 單滾珠螺母
- 雙滾珠螺母
- 左/右旋絲杠
- 無驅動產品
The Linear Motion Systems Product Selector is Temporarily Unavailable
Click the button below to use the newest edition of our industry's most advanced sizing and selection tool for linear motion system: LinearMotioneering.
Family
Drive Type
Guide Type
Repeatability
Nut Type
Stroke
Travel per Revolution
Carriage
Protection
Shaft Orientation
Shaft Quantity
Left Side (angle), First End (inline)
Right side (angle), Other end (inline)
Left Side (angle), First End (inline)
The type of shaft on the Left side of a belt driven (right angle) unit or on one end of the inline (screw driven) units.
Right side (angle), Other end (inline)
The type of shaft on the Right side of a belt driven (right angle) unit or on the other end of double shaft inline (screw driven) units.